We ship worldwide — Singapore, Australia, Malaysia, Indonesia, Philippines, India, Middle East & more

3G Electric
⌕
Source itSign inRFQ Cart
Kromschroder logo

Kromschroder

GermanyControls & Actuators

Kromschröder (Germany; now part of Honeywell via the Elster acquisition) designs the gas-control hardware specified on the majority of European process-industry gas burners — industrial ovens, kilns, dryers, and thermal oxidizers. The Kromschröder catalog is available, covering the BCU / IFS burner-control units, VAS / VCS automatic shut-off valves, CG motorised gas-metering valves, DG / DL gas pressure switches, and the IC 20 / IC 40 electronic actuators.

180
In Collection
12,386
Full Catalog
1 Day
Quote Response
Germany
Origin
Worldwide Shipping
Air & sea freight
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Browse:
Show
Page 1 of 4
180 products
← Prev1234Next →

About Kromschroder

Kromschröder (Germany; now part of Honeywell via the Elster acquisition) designs the gas-control hardware specified on the majority of European process-industry gas burners — industrial ovens, kilns, dryers, and thermal oxidizers. The Kromschröder catalog is available, covering the BCU / IFS burner-control units, VAS / VCS automatic shut-off valves, CG motorised gas-metering valves, DG / DL gas pressure switches, and the IC 20 / IC 40 electronic actuators.

The Kromschröder specification shows up most often on process-industry thermal equipment — the kinds of installations where the burner is a subsystem of a larger industrial process (glass, steel treatment, ceramic, textile dyeing, cement pre-heat), rather than a simple boiler. The hardware runs reliably under high ambient temperatures and extended duty cycles, which fits continuous-process plant conditions worldwide.

The highest-turnover Kromschröder SKUs are available for prompt supply — BCU 370, IFS 110, VAS 115/R / VCS 130, and the CG 20 / CG 25 motorised valves. Field commissioning includes IC-actuator travel calibration, pressure-switch trip-point setting, and documentation against the applicable national gas-burner code. Less-common SKUs have a factory lead time on request.

Common Applications

  • Process-industry thermal oxidizers — BCU 370 with VAS automatic shut-off
  • Industrial ovens and dryers — IFS 110 ignition safety + CG motorised metering valves
  • Textile-dyeing plant gas heaters — DG gas pressure switches with IC 20 actuators
  • Ceramic and glass kilns — BCU series on modulating high-turndown gas trains
  • Retrofit swaps on European-designed burner racks (Dungs → Kromschröder variants)

Product Lines

BCU 370 / BCU 560 burner controllersIFS 110 / IFS 258 ignition safetyVAS / VCS automatic shut-off valvesCG 20 / CG 25 motorised metering valvesDG / DL gas pressure switchesIC 20 / IC 40 electronic actuators
Origin: Manufactured in Germany

Related brands we carry

Comparable manufacturers in the same product category.

Brahma
ELV
Fantini Cosmi
Honeywell
Mectron
Pactrol

Frequently asked questions

Common questions about Kromschroder from 3G Electric.

Are Kromschröder products available?

Yes. We carry the full Kromschröder (Elster / Honeywell group) gas-burner controls portfolio — BCU burner controllers, VAS/VCS valves, CG motorised valves, DG pressure switches, and IC electronic actuators.

What is the difference between a Kromschröder BCU and a Siemens LME?

Both are burner-management units but optimised for different applications. Siemens LME is typically specified on commercial heating-boiler installations; Kromschröder BCU is typical on process-industry equipment (ovens, kilns, dryers) that runs extended duty cycles at higher process temperatures. We carry both and can advise on the right choice for your plant.

Are Kromschröder BCU and IFS controllers available?

Yes — BCU 370, IFS 110, and the most-requested VAS / VCS valve configurations are typically available on shorter lead times. Other Kromschröder SKUs have a factory lead time on request.

Can you perform Kromschröder IC-actuator commissioning on-site?

Yes. Our field engineers handle travel calibration, flame-safety verification, and commissioning documentation for Kromschröder installations.

Are Kromschröder products approved for industrial gas installations?

Yes. Kromschröder gas-safety components carry the EN 161 / EN 88 / EN 1854 / EN 676 certifications accepted under most national gas-burner-code requirements. Conformity certificates accompany each order.

Does 3G Electric supply Kromschroder products?

Yes — 3G Electric (S) Pte. Ltd. supplies Kromschroder products. We stock the Kromschroder catalog and supply genuine factory-original products with full manufacturer warranty and technical support.