3G Electric
⌕
Sign inRFQ Cart

FAG

Buy FAG flue gas analysis equipment in Singapore. 70+ SKUs in stock at 3G Electric. Order combustion analysers and gas monitoring tools with fast SG delivery.

70
In Collection
12,386
Full Catalog
Show
Page 2 of 2
70 products
← Prev12Next →

About FAG

FAG manufactures flue gas analysis equipment and gas control components for industrial combustion monitoring and fuel gas regulation. The product line centres on portable and installed analyzers, pressure regulators, filter cartridges, and sampling accessories used in boiler rooms, burner test facilities, and plant maintenance workflows. FAG regulators and filters are rated for natural gas, LPG, and non-corrosive gases, with inlet pressures to 500 mbar and outlet ranges typically 5–300 mbar, meeting standards such as UNI EN 88 Classe A gruppo 2. Filter cartridges are available in multiple flow configurations (10001/02, 10206, 10207/08, 10210, 10604/5/6 series) to suit different analyzer inlet demands and contamination loads. Pressure taps and sampling manifolds support connection of probes and sensors to plant gas lines. Component construction uses aluminum die-cast bodies (GD AISi 12 EN AB 46100, G AISi 9 EN AB 43100) and zinc-alloy covers, selected for corrosion resistance in humid boiler environments. 3G Electric maintains 70+ SKUs of FAG consumables and assemblies in inventory, enabling replacement-part fulfillment and rapid repair turnaround for combustion test equipment across multiple geographic regions. Technicians and plant engineers rely on FAG filter and regulator modules to maintain measurement accuracy and extend analyzer service intervals by removing particulate and moisture before flue gas enters sensor cells.

Industrial applications we supply

  • Boiler combustion testing — FAG analyzers with integrated regulator-filter assemblies (STAB 300–310) for natural gas and LPG burner performance measurement.
  • Flue gas sampling networks — FAG pressure regulators and filter cartridges supplying clean, conditioned gas to multiple analyzer sensors in large plant installations.
  • Service and calibration labs — Replacement filter cartridges and pressure taps for routine maintenance and recalibration of portable combustion test equipment.
  • Fuel gas supply regulation — FAG regulators rated to 500 mbar inlet pressure for reducing line pressure and protecting downstream analyzer components.
  • Moisture and particulate removal — FAG filter cartridges (10001–10604 series) in boiler-room and burner-test environments to extend sensor life and reduce cross-contamination.
  • LPG distribution monitoring — FAG regulators and filter modules in LPG tank and pressure-regulator systems where combustion efficiency measurement is required.

Related brands we carry

Comparable manufacturers in the same product category.

Inpro
Watts
CBM
TG
Elster

Frequently asked questions

Common questions about FAG from 3G Electric.

What filter cartridges does FAG supply, and how do I select the correct one for my analyzer?

FAG offers filter cartridges in multiple series, including 10001/02, 10206/10606, 10207/08/10607/10608, and 10210/10604/5/6. Selection depends on your analyzer model and inlet gas flow rate. Higher-flow applications typically require cartridges rated to greater volumetric throughput; cartridge part number is cross-referenced in your analyzer manual. 3G Electric can confirm compatibility during quote and order entry.

What is the pressure range of FAG regulators, and are they suitable for LPG applications?

FAG regulators (e.g., model STAB 300–310) are rated for inlet pressures to 500 mbar and outlet ranges of 5–150 mbar or 5–300 mbar depending on model. They handle natural gas, LPG, and non-corrosive industrial gases and meet UNI EN 88 Classe A gruppo 2 standards. Always verify inlet/outlet pressure specs against your application before ordering.

Can FAG pressure regulators and filters be installed together, or must they be purchased separately?

FAG supplies both integrated regulator-plus-filter assemblies (e.g., SKU FAG14002, TAR D1/2" with 500 mbar inlet and 5/150 mbar outlet) and individual components. Integrated units are pre-matched and mounted on a single body, reducing installation time. Separate regulators and filter cartridges are also available for retrofit or modular installations.

What materials are used in FAG regulator and filter bodies, and why?

FAG bodies are cast aluminum (GD AISi 12 EN AB 46100 or G AISi 9 EN AB 43100) with zinc-alloy covers (ZAMA 3 INI EN 1774). Aluminum provides strength and weight efficiency; zinc-alloy covers resist corrosion in boiler-room humidity. These materials are specified for durability in gas supply and combustion-sampling environments.

How often should I replace FAG filter cartridges in a flue gas analyzer?

Cartridge life depends on flue gas contamination and volumetric flow. Visible particulate clogging or a rise in analyzer response time signals cartridge replacement. Most plants change cartridges every 3–12 months during routine maintenance. 3G Electric stocks common sizes to minimize downtime.

Are FAG pressure taps and sampling fittings standardized, or model-specific?

FAG pressure taps are available in standard thread forms (e.g., 1/4 M external thread, SKU FAG30014) compatible with common probe and manifold connectors. Verify thread type and port size in your analyzer installation manual. 3G Electric can cross-reference taps to your equipment during procurement.